How to maintain a SLR camera？
AlternatecameraBoth are complex electronic equipment。Use the correct maintenance method and maintenance measures，Can 易彤料理机售后 give full play to its best performance，It also maximizes prolong service life。but，The wrong maintenance method may also be shortenedcameraService life，Affect the final image quality！Nowadays，The second brother will talk to you to talk about the misunderstanding and precautions of camera maintenance。
1。Avoid shooting in strong light for a long time
Digital cameraCCDorCMOSSolid-state imaging equipment has limited capacity to strong light and temperature measurement。therefore， to make sureShootQuality and imaging equipment will not be burned by strong light，Try shortenShootGlare time。
Digital camera is exposed to strong light or high temperatures，It will also cause slight deformation of the body。therefore， 易彤破壁机修理 Do not place digital cameras in strong light or heating equipment。
2。Don't clean your ownCMOS
cameraCMOSIs a very fragile component，If you accidentally damage it，Replacement price is quite expensive。Now many people like to watch online tutorials come from others，However, for novices, the wiping housing is preferably installed in normal use. Ultraviolet mirror。This will save you a lot of trouble。therefore， Do not recommend personal cleaningCMOS，Let professional and technical personnel clean up it。
3。Don't blow dust with your mouth
一些新手从camera上取下Lens，Discover dust on the sensor。Will you blow dust with your own mouth，This will make the saliva fall directly on the sensor.，Clean up saliva is more troublesome than cleaning dust。Hao Society recommends cleaning up a professional dust removal tool。
Lens是camera中最关键和最脆弱的部分。therefore， Use a camera，Should be specially paying attention to the protection of camera lenses。Don't make it easily, don't let the dirty hands.“Contaminate”Lens，Cleaning the lens only if necessary。It is best to use a soft brush when cleaning.。
If you encounter more stubborn dust，Please be sure to use a special mirror cloth or mirror paper.，Remember not to use a soft paper towel（For example, thin paper）Cleaning lens。Since the wood pulp contained in these paper is more likely to scale the coating，It will seriously damage the key coating on the camera lens。
4。Do not randomly insert or remove the memory card
It is not to say that you will never take the memory card.，This means writing data to a memory card，Do not perform disassembly operations。usually，If you use a high speed continuous，Memory card takes a long time to write data，Forcibly removal can cause data corruption or even damage memory card。
5，Maintenance battery
Digital cameras are different from traditional cameras。Digital camera is particularly large，therefore， SLR cameras typically use nickel-hydrogenbatteryLithiumbatteryPower supply。
NiMH batteries produce memory effects，This impact reduces the total capacity and time of use of the battery.，over time，The cost of storage will be reduced，therefore，You should try to exhaust all power and charge； The memory effect of the dedicated lithium battery can almost ignore。No special attention。
Apart from this，Pay attention to keeping battery insulation integrity，Once damage is found，Should be firmly attached with transparent tape。Be sure to check if the electrode of the battery is oxidized，Simply wipe it with a mild oxidation，When discovers serious oxidation or falling off，Replace the new battery immediately，In order to avoid damage to a single lens reflective camera due to a fault such as battery leakage。
In addition，Do not use digital cameras for a long time，Battery must be removed from a digital camera or charger，And completely discharge and put it in a dry place Cool environment。
6。Avoid placing in a humid environment
Ultrafinal old lens is most prone to mold。at this time， Wosting must be prevented。
Place the camera in a dry environment，When shooting in a humid environment，Please use waterproof jackets。Apart from this， The interior of the camera will make the lens mold。This is the body's harm，Basically, it is impossible to fix。
It is recommended to use a dry box or desiccant to be stored，Moisture。
7。Equipped with camera strap
Whether it is a photographer or a personal photographer，Continuous use SLR shooting will feel fatigue，Since most SLR cameras are heavy，therefore， Use the camera with one of the most effective protection measures。It can effectively prevent the camera from being damaged due to picking，Especially those very bulky digital SLR cameras。
8。Long-term preservation of digital cameras
When the digital camera is not in use，In addition to carefully cleaning the body and the shot outside the important part，Also 易彤破壁机不工作维修 pay attention to the maintenance of other parts and accessories，Camera and leather cases should be placed separately，Avoiding the mold on the skin on the skin。The camera tightened the shutter， Selfie should be released in order to avoid tired of fatigue and damage these parts。
The lens aperture should be set in the maximum gear，The focus distance should be set to infinite。If it is a camera with a double focus lens or zoom lens，The lens that reached out should also be retracted from its original position.，Place it in a storage container that can be kept dry。
