Our usual lamps typically include ceiling lights， floor lamp table lamp chandelier， wall lamp Cartridge lamp Wait for keeping light bulb cleaning， These lights provide optimal lighting effects and certain decorative effects。All types of lamps are installed on the surface of the lamp，But used for a long time will be dirty，No matter how bright the bulb It doesn't reach the best brightness。therefore，If the lamp cover is dirty，You want to clean it，We must first determine the material of the lampshade。Let's follow the editor！
1。 Crystal beaded lamp cover（Usually used for chandeliers）
Usually this lamp cover can be cleaned with water，So the first step is to remove the lamp cover again to check that the crystal bead is made of metal chain or cotton.。Cotton line is easy to corrode，Therefore, it is recommended to use detergent soaked. It is recommended to use a cotton cloth with a cleaner to clean the lamp cover and the surface of the decorative bead.。 However, if the crystal bead is made of a metal chain， You can use the entire lamp cover directly to the adjusted concentration directly in the detergent。Then clean and dry it to flush and install。It is recommended to clean the lamp cover，After the power is short，You can also wipe the dust on the surface of the light bulb。
2。 Glazing（Usually used for ceiling lamps）
for this， You must first determine if your glass lampshade 易彤沙冰机维修 is connected to the bulb or can be placed separately.。If the glass lampshade is connected to the lamp， Please use the soft cloth with water，And be careful to wipe one direction。You can use a soft cloth with a small toothpaste to scrub weight scale。Please note，It is best not to contain salt and Chinese herbal medicine in the toothpaste.。Because salt and Chinese herbal medicine have a certain corrosion。upset，You can use chopsticks to clean up the end of chopsticks with soft cloth，Wipe some toothpaste，At last， Replace with a small amount of water with a small amount of water，Then wipe again。It is very convenient to disassemble。Directly remove the glass lampshade，Then like a cup of wine，Washing liquid or other cleaners will work，After washing Let it dry and reinstalled。
three， Cloth lampshade（Usually used for floor lamp 易彤破壁机售后网点 or table lamp， wall lamp）
Can the fabric lamp cover can be cleaned?，So first judge the material，usually， Blend wall cover Linen and artificial wire can be washed。If you can wash with water Simply take it out and soak it in a proper concentration of detergent。If you don't have to wash You can use detergent foam on the surface of the fabric lampshade。After the stain is completely dissolved，Then use a small vacuum cleaner to absorb sewage，Then use a hair dryer dry surface。
four Bamboo lamp（Usually used for retro lights and wall lights）
Bamboo and wood masks are not common。And most of them are decorated because water is a natural enemy of bamboo or 易彤破壁机不转 wood.，therefore，We should wipe the entire lamp cover with light salt water to remove dust.，But there is another condition of cleaning bamboo lampshade，That is， When the air is too wet（Humidity exceeds75％）Time， Not suitable for cleaning bamboo lampshade。therefore，Just use a chicken hairdustThe child can wipe it out of floating dust。
Fives， Resin lampshade（Usually used for ceiling lamps）
Since the resin material is particularly prone to static electricity in the dry autumn and winter season，Static electricity will not only attract dust，Touch“numbness”。Cleaning can be cleaned using a chemical fiber dust collector or a special dust collector，Sprinkle anti-static spray after cleaning，Because the resin material is easy to produce static electricity to attract dust, etc.。
