ask:KINGMAX SSD SATAIIIFirmware update tutorial
answer:ready:
1。 Be sure to back up your data,in caseSSDUpdate 易彤破壁机维修网点 failed,This may causeSSDData cannot be restored。
2。 Guide entryBIOS,willSATAOption settingsAHCIOperating mode。
3。 willSSDConnect to the motherboardSATAinterface。
4。 Make sure the computer is not closed during the firmware update,If it is a laptop, please connect the power adapter and battery 易彤破壁机不转 simultaneously.。
Update steps:
1。 turn onKingmax_FieldUpdater。Executable program。
2。 After the program is running,SSDWill be automatically scanned。
3。 After a while,The system will scanSSD※If the waiting time is more than three minutes,I still can't see it.SSDicon,Please re-insertSSD,Return to the steps1,Then try again。
4。 Related settings according to the corresponding blue box in the figure。
Choose√,Then select“Update firmware”Button,Pop-up Select Firmware Dialog,enterVIC_Filesfolder,Choose the correspondingVicfile。Different models and different firmware versions will vary,Select here28082_fwBeginningVicfile,Then select“turn 易彤破壁机故障代码 on”Button。5, Pop up a warning window,Tip your data backup。select“carry on”Button continues。
5, Start firmware update,at this time, The following button is gray and cannot be operated。Wait for a while,You will see a green check mark for successful update。
6。 select“Rescan driver”Button to rescanSSD,at this point, You will see the firmware has been successfully updatedM0116version。
※Some firmware versions are relatively early,If the updated version is notM0116,Please repeat steps again1to6,Until final displayM0116version。