您好,欢迎访问易彤破壁机售后维修中心!

优秀品牌

百年故事

质量保障

原故障报修90天

使用年限

高出平均寿命30%

全国咨询热线

(010)-5367-2025

易彤破壁机维修_易彤料理机售后服务(010)-5367-2025
您的位置:主页 > 新闻动态 >

新闻动态

联系我们

地址:北京市门头沟区滨河南路3号院1号楼

咨询热线:

(010)-5367-2025

15726676726

易彤沙冰机维修障

发布时间:2021-06-10 00:10人气:
易彤沙冰机维修障

  User guidance

  Q1:About the instruction manual of Shenhua micro projection。

  answer:Open the box,There is a detailed paper inside。 Please read the instructions carefully before use.。

  Q2:How to charge the power supply。

  answer:The charging method of the stent is to use a white special adapter for the paint paint.LShaped plug connection to the right side of the battery holderDC INport。Can charge。The side of the indicator will indicate the status of the battery.,Red flashing will be displayed when the battery is low,Battery charging and discharging process show blue flash,Filled,The indicator continues to be blue。 Shenhua power support supports two modes:Single charging and machine charging。

  problem3:What should you pay attention to when using the micro projection of the god??

  answer:1。Try using the original cable and wire of the Shenhua Mini Projector;

  2。Please stay away from the heat source during use,Avoid using it in a humid environment;

  3。Pay attention to the nominal value of the power supply voltage,Grounding wire and power polarity of the machine; Cut the power when not in use;

  4。If it is found during use, it is found to be caused by software.,Please unplug the power first;

  5,Shenhua Mini projected the optical system inside the super-screen TV.。Please, handle with care;

  If there are other conditions that cannot be used normally,Please contact the after-sales service of Shenhua Mini Projector as soon as possible。Do not disassemble the machine。

  problem4:how to useAR?

  answer:Steps for usage:

  1)After connecting the whole machine to the bracket, Turn it in the projection area90°Right angle placement;

  2)The height between the projector and the projection screen50?70cmbetween;

  3)After the start,Please disagree with non-reflective blank or placed in projected desktop;

  4)Ready after Ready,Use the magic pen in the application interface“ AR Projection”program,You can start demonstration;

  a)Place the palm and five fingers in the display detection area。(In addition to the direction of text instructions,Other three directions can be accepted)

  b)After the program starts,Screen will count down3, 2, with1Start to know

  c)Voice prompts“Successful identification”Rear,Don't startARprojection

  Precaution:

  1)Try to avoid nail polish on the nails;

  2)Do not track projections,Please place projection vertically;

  3)It is best to dim.,In the dark scene,Projection display effect will be more realistic;

  4)After the program starts,During the identification process,Please keep your hands still do not move;

  Q5:How to match the magic pen?Where should I be aimed at??

  answer:answer:Remote control,Make sure the projector is turned on,And close the remote control close to the projector,maintain5-10Centimeter distance,Long press the upper left corner of the remote control“pair”Button,Remote control indicator starts flashing,After the match is successful,The screen will be displayed“Paired success”prompt。

  Q6:How to activate Youku Member Card?

  answer:answer:(1)First register as Youku member。(If you already have a member account,Go directly to steps2)

  ①Enter the homepage>Member Centre

  ②Click on the left side“Not logged in”icon,Enter Member Registration and Login Interface

  ③Click“registered”,Follow the prompts to complete the registration

  remind:You can scanQRCode and follow the prompt to complete the registration,You can also use a computer or mobile phone according to the prompt on the back of the membership card.http:// 易彤破壁料理机修理 viplog in。Youku。com,Follow the prompts to complete the registration

  (2)Activate membership card

  ①Click“Member Centre”

  ②Select activation member

  ③select“Activate membership card”

  ④Enter a password on the back of the membership card,Simply follow the instructions on the screen。

  (3)Member qualification update

  ①Login Member Center

  ②select“Continue”

  ③Scan QR code,Select the corresponding package,Follow the prompts to complete the operation

  Q7:How to use manual focus?

  answer:Close autofocus in the settings,Manual focus function will open automatically,There will be a status bar and adjustment on the right side.±key,Click±Button manual adjustment。

  Q8:How to charge remote control?

  answer:answer:When the 易彤料理机售后 magic pen needs charging,You can use regular5V?1AMobile phone adapter andMicro USBCable is a magic pen charge,Do not use the projector adapter charging。Magic pen has built-in1000mAhHigh performance polymer battery,can support40Multiple hours of uninterrupted operation,Or normal standby time exceeds700hour。

  General failure

  Q1:Press the power button,Why not open?

  answer:Modify the boot mode,To avoid malfunction。

  1。 Insert power adapter,Power state

  1。Remote control power button control open/turn off。

  2。Short press the power switch to control/turn off。

  Q2:How to solve general failures

  answer:1。If you have a fever, please check if the vent is blocked or blocked.;

  2。Image problem machine is properly placed,Vertical on the projection screen or the wall。Please adjust the related image settings;

  3。Sound problem This may be caused by the source or sound setting,Please change the source or adjust the relevant sound settings。Play video,Please select the correct track or channel;

  4。Unable to enter text,Whether the remote control can be used normally,connectionUSBCan I enter properly after the keyboard?The soft keyboard is displayed normally。It is recommended to refresh the firmware and try again.。

  5,Unable to play movie files,Whether the file is complete,Whether the player supports file format;

  6。Network unable to connect(wireless),Whether the network settings are correct。If you can't solve the problem,You can contact the network service provider first,Solve the problem of the network itself;

  7。There is a problem when connecting external devices,Can external devices work properly?,Do you need other software help?,Whether the software is running normally,Whether the connector or cable used to connect can work properly;

  In checking a general failure,It is recommended to restart the machine before checking。Some contact checks,Please turn off the machine first, Then disconnect the power and check the state after the machine is naturally cooled.。Software or setup check,Recommended refreshing firmware(Manual upgrade firmware locally),Then reinstall the software to check。

上文就是为大家讲的易彤沙冰机维修障了。

本文地址:http://www.josia.cn/a/xinwendongtai/1157.html

推荐资讯